1. На данный момент Вы не авторизованы. Если Вы уже являетесь зарегистрированным пользователем, тогда Вы можете Войти. Если нет, то Вы можете зарегистрироваться и получить доступ к нашему форуму. Зарегистрироваться.

  2. Unlock Iphone, Nokia at&t , nck huawei , samsung и др - TUT! Сделать заказ можно тут
    Скрыть объявление

W580 при включении только вибро

Тема в разделе "SonyEricsson", создана пользователем ephiop, 27 янв 2011.

Статус темы:
Закрыта.
  1. ephiop

    ephiop Пользователь

    Регистрация:
    6 янв 2009
    Сообщения:
    35
    Симпатии:
    21
    Баллы:
    8
    Адрес:
    Gomel, Belarus
    Здравствуйте! Есть ТА Sony Ericsson W580. При включении срабатывает вибро, а дальше загрузка не идет. Прошивал, восстанавливал GDFS, ничего не помогает(шьется и финализируется без ошибок). При включении потребление подпрыгивает до 50ма, затем падает до 30ма и держится (с кнопки не выключается). При вскрытии были обнаружены следы влаги, ТА промыл в УЗВ, перекатал процессор, КП, BT, ничего не помогло. Проц менял.
    Дебаг лог прилагаю:
    Код:
    FSFLASH: CPU is ARM 926, revision 3, architecture 6
    FSFLASH: Inst Cache size is 32.00 Kb, 4-way, 32 bytes/line.
    FSFLASH: Data Cache size is 16.00 Kb, 4-way, 32 bytes/line.
    FSFLASH: NOR (Sibley) Flash device @ [0x44000000-0x47FFFFFF] 65536 Kb
    FSFLASH:   Vendor (0x20): ST
    FSFLASH:   Device: ?????? (0x8819)
    FSFLASH:   Unique Device Number: 0x09C1413431032ACD
    FSFLASH:   Page size: -
    FSFLASH:   Write Buffer Size: 1024 bytes
    FSFLASH:   Burst Mode: ON
    FSFLASH: Erase region [0x44000000-0x47FFFFFF] has an erase block size of 256 Kb
    FSFLASH: Mounting logical flash device 0
    FSFLASH: Flash segment 0:0 located @ [0x45E00000,0x47DFFFFF] (32768 Kb)
    FSFLASH:   Flash type:           NOR
    FSFLASH:   Block size:          1024
    FSFLASH:   Logical erase size:   256 Kb
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 8224 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 10368 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 11424 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 12480 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 107296 bytes requested in total ****
    FSFLASH: Write processes started, pid = 0x1002D.
    FSFLASH: Erase processes started, pid = 0x1002E.
    FSFLASH: Check
    FSFLASH: Stage 1
    FSFLASH: Stage 2
    FSFLASH: Stage 3
    FSFLASH: Stage 4
    FSFLASH: Config block located @ 0x45E00000
    FSFLASH:   DELETED block 29316 @ 0x45E5C000 rolled back
    FSFLASH: Mount block located @ 0x46B62400
    FSFLASH:   DELETED block 29316 @ 0x46B6A000 is newer
    FSFLASH:   DELETED block 29316 @ 0x46B6A000 rolled back
    FSFLASH:   DELETED block 29044 @ 0x46B6C800 rolled back
    FSFLASH:   UPDATED block 29316 @ 0x46B6E000 rolled back
    FSFLASH:   UPDATED block 29044 @ 0x46B6E400 rolled back
    FSFLASH:   CLEAN blocks     1060
    FSFLASH:   MIN CLEAN blocks 512
    FSFLASH:   BAD blocks       0
    FSFLASH: State 5 skipped
    FSFLASH: Stage 6.1
    FSFLASH: Stage 6.2 skipped
    FSFLASH: Stage 7
    FSFLASH: Stage 8
    FSFLASH: Check done
    FSFLASH: TOTAL number of blocks:  32768
    FSFLASH: AVAILABLE blocks:        31596
    FSFLASH: MAX logical block nbr:   31595
    FSFLASH: COMMITTED blocks:        13139
    FSFLASH: FREE blocks:             18457
    FSFLASH: DIRTY blocks:            18512 (0 BAD)
    FSFLASH: CLEAN blocks:             1056 (1056 NOR)
    FSFLASH: HEADER blocks:              61
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 122560 bytes requested in total ****
    FS: Mounting FAT file system partition / for read/write
    FS:   SecPerClus = 2
    FS:   BytesPerSec = 512
    FS:   RootEntCnt = 512
    FS:   NumFATs = 1
    FS:   RsvdSecCnt = 1
    FS:   Type: FAT16
    FS:   AtFSX: 11.13
    FS:   Block size: 1024
    FS:   Read size: 1024
    FS:   FAT mirroring: OFF
    FS:   Sector locations
    FS:     Size:               54079 (0xD33F)
    FS:     PBR:                     1 (0x1)
    FS:     FAT start:               2 (0x2)
    FS:     Active FAT start:        2 (0x2)
    FS:     Root start:            108 (0x6C)
    FS:     Clusters:            26970 (0x695A)
    FS:     Cluster start:         140 (0x8C)
    FS:     Cluster last:        54079 (0xD33F)
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 130912 bytes requested in total ****
    FS: File System Size:           26970 (26970 Kb)
    FS: Free Logical Blocks:        14326 (14326 Kb)
    FS: Free Physical Blocks:       18456 (18456 Kb)
    FS: Used Blocks:                12644 (12644 Kb)
    FS: Partition / mounted
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 146624 bytes requested in total ****
    FS: Mounting FAT file system partition /tpa/settings/ui/bgim/cache for read/write
    FS:   SecPerClus = 2
    FS:   BytesPerSec = 512
    FS:   RootEntCnt = 512
    FS:   NumFATs = 1
    FS:   RsvdSecCnt = 1
    FS:   Type: FAT12
    FS:   AtFSX: 11.13
    FS:   Block size: 1024
    FS:   Read size: 1024
    FS:   FAT mirroring: OFF
    FS:   Sector locations
    FS:     Size:                3999 (0xF9F)
    FS:     PBR:                     1 (0x1)
    FS:     FAT start:               2 (0x2)
    FS:     Active FAT start:        2 (0x2)
    FS:     Root start:              8 (0x8)
    FS:     Clusters:             1980 (0x7BC)
    FS:     Cluster start:          40 (0x28)
    FS:     Cluster last:         3999 (0xF9F)
    FS: File System Size:            1980 (1980 Kb)
    FS: Free Logical Blocks:         1980 (1980 Kb)
    FS: Free Physical Blocks:       18456 (18456 Kb)
    FS: Used Blocks:                    0 (0 Kb)
    FS: Partition /tpa/settings/ui/bgim/cache mounted
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 163008 bytes requested in total ****
    FS: Mounting FAT file system partition /ifs for read/write
    FS:   SecPerClus = 2
    FS:   BytesPerSec = 512
    FS:   RootEntCnt = 512
    FS:   NumFATs = 1
    FS:   RsvdSecCnt = 1
    FS:   Type: FAT12
    FS:   AtFSX: 11.13
    FS:   Block size: 1024
    FS:   Read size: 1024
    FS:   FAT mirroring: OFF
    FS:   Sector locations
    FS:     Size:                1799 (0x707)
    FS:     PBR:                     1 (0x1)
    FS:     FAT start:               2 (0x2)
    FS:     Active FAT start:        2 (0x2)
    FS:     Root start:              6 (0x6)
    FS:     Clusters:              881 (0x371)
    FS:     Cluster start:          38 (0x26)
    FS:     Cluster last:         1799 (0x707)
    FS: Partition not closed
    FS: Phone not properly shut down, running FSCK on partition /ifs
    FS: FSCK level is 1
    FSCK: Directory Check
    FS: Partition /ifs set to clean
    FSCK: Done
    
    FS: File System Size:             881 (881 Kb)
    FS: Free Logical Blocks:          544 (544 Kb)
    FS: Free Physical Blocks:       18457 (18457 Kb)
    FS: Used Blocks:                  337 (337 Kb)
    FS: Partition /ifs mounted
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 180256 bytes requested in total ****
    FS: Mounting FAT file system partition /system for read/write
    FS:   SecPerClus = 2
    FS:   BytesPerSec = 512
    FS:   RootEntCnt = 512
    FS:   NumFATs = 1
    FS:   RsvdSecCnt = 1
    FS:   Type: FAT12
    FS:   AtFSX: 11.13
    FS:   Block size: 1024
    FS:   Read size: 1024
    FS:   FAT mirroring: OFF
    FS:   Sector locations
    FS:     Size:                3199 (0xC7F)
    FS:     PBR:                     1 (0x1)
    FS:     FAT start:               2 (0x2)
    FS:     Active FAT start:        2 (0x2)
    FS:     Root start:              8 (0x8)
    FS:     Clusters:             1580 (0x62C)
    FS:     Cluster start:          40 (0x28)
    FS:     Cluster last:         3199 (0xC7F)
    FS: File System Size:            1580 (1580 Kb)
    FS: Free Logical Blocks:         1554 (1554 Kb)
    FS: Free Physical Blocks:       18457 (18457 Kb)
    FS: Used Blocks:                   26 (26 Kb)
    FS: Partition /system mounted
    MALL: **** NEW MAXIMUM HEAP 0 USAGE: 96 bytes requested in total ****
    
    
    BuildInfo: Label: <CRH109672_3_R19A003> Variant: <cxc4010129_E150_CU_PHONE> 
    BuildInfo: Generated: 2007-11-20 20:51 by Off.Bld
    Product  : <Sony Ericsson W580> Version: 0000
    HW Setup : Marika P2A (Id:0x9900) IRDA: B089 BT: C089 RS232: Error 
    Vendor   : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000 
    OS: core startup complete!
    OS: Starting TimerProcess
    OS: Vector 13 Pri 0 do not use DDA
    OS: Vector 24 Pri 1 do not use DDA
    OS: Vector 23 Pri 2 do not use DDA
    OS: Vector 22 Pri 3 do not use DDA
    OS: Vector 18 Pri 4 do not use DDA
    OS: Vector 7 Pri 11 do not use DDA
    OS: Vector 6 Pri 5 do not use DDA
    OS: Vector 2 Pri 6 do not use DDA
    OS: Vector 3 Pri 0 do not use DDA
    OS: Vector 27 Pri 7 do not use DDA
    OS: Vector 1 Pri 8 do not use DDA
    OS: Vector 0 Pri 9 do not use DDA
    OS: Vector 32 Pri 21 do not use DDA
    OS: Vector 33 Pri 21 do not use DDA
    OS: Vector 60 Pri 30 do not use DDA
    OS: Vector 70 Pri 30 do not use DDA
    OS: Vector 71 Pri 30 do not use DDA
    OS: Vector 9 Pri 10 do not use DDA
    OS: Vector 17 Pri 10 do not use DDA
    OS: Vector 37 Pri 17 do not use DDA
    OS: Vector 26 Pri 3 do not use DDA
    
    MPH: PID 65634
    RLC_DL: S I
    RR: PID 65636
    RR: RR_MM_PRIM 469955328 
    RR: MM_RR_PRIM 469955968 
    RR: MPH_RR_PRIM 469956608 
    RR: RR_MPH_PRIM 469961088 
    RR: DL_RR_PRIM 469964288 
    RR: RR_DL_PRIM 469964928 
    RR: RR_MMM_PRIM 469968768 
    RR: MMM_RR_PRIM 469969408 
    RR: RR_RLC_PRIM 469970688 
    RR: RLC_RR_PRIM 469971328 
    RR: PH_MPH_PRIM 470181248 
    RR: MPH_PH_PRIM 470186688 
    RR: MPH_CB_PRIM 469973568 
    RR: CB_MPH_PRIM 469974208 
    RR: MPH_MMM_PRIM 469976128 
    RR: MMM_MPH_PRIM 469976768 
    RR: PH_RLC_PRIM 470194688 
    RR: RLC_PH_PRIM 470197888 
    RR: RLC_LLC_PRIM 469981888 
    RR: LLC_RLC_PRIM 469982528 
    RR: RR_LLC_PRIM 469985088 
    RR: LLC_RR_PRIM 469985728 
    RR: PH_RR_PRIM 470200448 
    RR: RR_PH_PRIM 470201088 
    RR: RR_TIMER_PRIM 469996928 
    RR: SIGID_INTERVAL_START_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996927 
    RR: SIGID_INTERVAL_END_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996949 
    RR: TEST_RR_TIMER_PRIM 1 
    RR: MPH_TIMER_PRIM 469995008 
    RR: T3206_VALUE: 800 ms
    RR: T3208_VALUE: 960 ms
    RR: T3210_VALUE: 300 ms
    
    RLC: RLC_LLC
    RLC: RLC_IDLE_REQ = 469981888
    RLC: RLC_GMM_DATA_REQ = 469981889
    RLC: RLC_DATA_REQ = 469981890
    RLC: RLC_UNITDATA_REQ = 469981891
    RLC: RLC_RLC_DATA_REQ = 469981893
    RLC: RLC_RLC_UNITDATA_REQ = 469981894
    RLC: RLC_DATA_RSP = 469981897
    
    RLC: LLC_RLC
    RLC: RLC_DATA_CNF = 469982528
    RLC: RLC_DATA_IND = 469982529
    RLC: RLC_STATUS_IND = 469982530
    
    RLC: RR_RLC
    RLC: RR_TBF_ESTABLISH_REQ = 469970688
    RLC: RR_UPLINK_TBF_RELEASE_REQ = 469970690
    RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 469970691
    RLC: RR_TBF_RELEASE_RSP = 469970692
    RLC: RR_DOWNLINK_ACK_NACK_REQ = 469970693
    
    RLC: RLC_RR
    RLC: RR_TBF_ESTABLISH_CNF = 469971328
    RLC: RR_UPLINK_TBF_RELEASE_CNF = 469971330
    RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 469971331
    RLC: RR_TBF_ESTABLISH_IND = 469971329
    RLC: RR_TBF_RELEASE_IND = 469971332
    RLC: RR_UPLINK_ACK_NACK_IND = 469971333
    
    RLC: PH_RLC
    RLC: PH_RLC_DATA_REQ = 470194688
    RLC: PH_RLC_DATA_RELEASE_REQ = 470194690
    RLC: PH_RLC_CONTROL_REQ = 470194691
    RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 470194693
    RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 470194694
    RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 470194695
    RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 470194696
    RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 470194697
    RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 470194698
    RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 470194699
    RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 470194700
    RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 470194701
    RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 470194702
    RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 470194703
    RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 470194704
    RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 470194705
    RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 470194706
    RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 470194707
    RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 470194708
    RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 470194709
    RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 470194710
    RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 470194711
    RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 470194712
    RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 470194713
    RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 470194714
    RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 470194715
    RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 470194716
    RLC: PH_RLC_RELEASE_REQ = 470194717
    
    RLC: RLC_PH
    RLC: PH_RLC_DATA_CNF = 470197888
    RLC: PH_RLC_EGPRS_DATA_TYPE1_CNF = 470199172
    RLC: PH_RLC_EGPRS_DATA_TYPE2_CNF = 470199173
    RLC: PH_RLC_EGPRS_DATA_TYPE3_CNF = 470199174
    RLC: PH_RLC_DATA_IND = 470197889
    RLC: PH_RLC_EGPRS_DATA_RTS_IND = 470199171
    RLC: PH_RLC_DATA_RTS_IND = 470197890
    RLC: PH_RLC_DATA_RELEASE_CNF = 470197891
    RLC: PH_RLC_CONNECT_IND = 470197892
    RLC: PH_RLC_CONTROL_CNF = 470197893
    RLC: PH_RLC_CONTROL_IND = 470197894
    RLC: PH_RLC_RELEASE_CNF = 470197895
    
    RLC: RLC_TIMER
    RLC: RLC_TIMER_T3164 = 469987008
    RLC: RLC_TIMER_T3166 = 469987009
    RLC: RLC_TIMER_T3180 = 469987010
    RLC: RLC_TIMER_T3182 = 469987011
    RLC: RLC_TIMER_T3190 = 469987012
    RLC: RLC_TIMER_T3192 = 469987015
    RLC_UL: S I
    MPH_Low: PID 65639
    LLC 11: state 0
    LLC 9: state 0
    LLC 7: state 0
    LLC 5: state 0
    LLC 3: state 0
    LLC: PID 65640
    LLC: <SMS 469772354
    LLC: >SMS 469772996
    LLC: <SNDCP 469978688 469978696
    LLC 1: state 0
    Prototype start process started!
    
    FSUSB: FS-USB Connection was initiated.
    
    
    RLink: RLINK_PH
    RLink: PH_RLINK_CONNECT_IND = 470178690
    RLink: PH_RLINK_DISCONNECT_IND = 470178691
    RLink: PH_RLINK_RTS_IND = 470178688
    RLink: PH_RLINK_DATA_IND = 470178689
    
    RLC: PH_RLINK
    RLink: PH_RLINK_DATA_REQ = 470178048
    
    RLink: RLINK_RLP
    RLink: RLINK_RLPEILD_HCITL.c: 613 EILD_HCITL_SetTXPin: PinLevel = 0 
    _RTS_IND = 469849344
    RLink: RLINK_RLP_DATA_IND = 469849346
    
    RLC: RLP_RLINK
    RLink: RLINK_RLP_DATA_REQ = 469849347
    RLink: RLINK_RLP_DTX_REQ = 469849348
    
    RLC: RLINK_RR
    RLC: RR_CHANNEL_MODE_INFO_IND = 314576640
    RLC: RR_CHANNEL_MODE_MODIFY_IND = 314576641
    RLink: State Idle
    RH: Activate on LRRAT: G
    RH state: Inactive
    Rational Rose RealTime C Target Run Time SystemRelease 6.5.1233.0
    Copyright (c) 1993-2005 Rational Software
    
    RTS ERROR: Failed to allocate additional 896 byte as static memory, allocating as heap, 1109 32-bit needed (1025 configured)
    RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 1110 32-bit needed (1025 configured)
    RTS ERROR: Failed to allocate additional 8 byte as static memory, allocating as heap, 1112 32-bit needed (1025 configured)
    RTS ERROR: Failed to allocate additional 12 byte as static memory, allocating as heap, 1115 32-bit needed (1025 configured)
    RTS ERR
    EILD_LLRS232_Init. Original GPIO routing:
      RX : No
      TX : No
      CTS: No, Index=0
      RTS: No, Index=0
    
    ### Print Server: Requesting DebugMux channel...
    O
    
    
    
    
    
    
    
    
    
    
    
    385       ### Print Server: Started OK
    
    
    
    
    
    
    
    
    
    
    
    A
    
    
    
    385       R: Failed to allocate additional 8 byte as static memory, allocating as heap, 1117 32-bit needed (1025 configured)
    385       RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 1118 32-bit needed (1025 configured)
    385       SM: Initiated; ProcessID = 65676 !(
    385       NS versions:
    385       MM: reset TMSI
    385       MM: No valid GSM keys
    386       MM: No valid WCDMA keys
    386       MM: state 0SEMC_ACB: Process started, pid 0x100e2.
    386       SEMC_ACB: Version = ACBM V3.13, debuglevel = 0x1131 [GLD] GRAM Bank 1 (noncached): 20400000 - 20800000
    386        [GLD] GRAM Bank 2: 20800000 - 20C00000
    386        [GLD] GRAM Bank 3: 20C00000 - 21000000
    386        [GLD] g_rgdwMemoryXRAM = (20E80000 - 20FFFFFF)GMM: ResetSIM_Data
    386       GMM: No valid GSM-GPRS keys
    386       GMM: No valid WCDMA keys
    386       LLC 1: Unexpected signal #469983810* CC7 state 0
    386       * CC6 state 0
    386       * CC5 state 0
    386       * CC4 state 0
    386       * CC3 state 0
    386       * CC2 state 0
    386       * CC1 state 0
    386       DRM: DRM_Process started
    386       DRM: DRM_ConfigFlags ----------------------- (start):
    386       DRM: DRM_ConfigFlags: CFG_ENABLE_OMA_DRM_SUPPORT: ---
    386       DRM: DRM_ConfigFlags: CFG_ENABLE_OMA2_DRM_SUPPORT: ---
    386       DRM: DRM_ConfigFlags: CFG_ENABLE_PLUGIN_DRM_SUPPORT: defined
    386       DRM: DRM_ConfigFlags: CFG_ENABLE_DVBH_DRM_SUPPORT: ---
    386       DRM: DRM_ConfigFlags: CFG_ENABLE_WMD_DRM_SUPPORT: ---
    386       DRM: DRM_ConfigFlags: CFG_ENABLE_EDC: ---
    386       DRM: DRM_ConfigFlags: WIN32: ---
    386       DRM: DRM_ConfigFlags: DRM_SECURITY_USE_SW: ---
    386       DRM: DRM_ConfigFlags: CFG_DRM_FAKE_CONTROL: defined
    386       DRM: DRM_ConfigFlags: CNH1600098_DRM_IDBG: ---
    386       DRM: DRM_ConfigFlags ----------------------- (end)
    388       CCS: IdleSS: State Idle @CallMeter startedSMC_MO_1 (65667) state 4
    388       SMC_MO_2 (65668) state 4
    388       SMC_MT (65669) state 4
    388       SMR_MO state 3
    388       SMR_MT state 3
    388       FSUSB: USB Mass Storage process started, pid = 0x100E6.
    388       FSUSB: FAT Snooping is Disabled.[ICC-LD] ICC_Reader_0_Process Started
    388       [ICC-LD] Status Changed: ICC_READER_DEACTIVATED, Reader: 0[SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0M: MODULE_INIT
    388        [GVI] GVI_CallQueue_PrepareCall called before GVI is ready, retry...GDFS_SRV State 1-Closed
    391       GDFS: Format version 1
    391       GDFS Log[1] <- Phys[0] 125025 bytes left. Erased    18 times
    392       GDFS Log[4] <- Phys[1] 123408 bytes left. Erased    19 times
    392       GDFS Log[2] <- Phys[2] 111625 bytes left. Erased    18 times
    393       GDFS Log[5] <- Phys[3] 128986 bytes left. Erased    19 times
    393       GDFS Log[3] <- Phys[4] 121203 bytes left. Erased    18 times
    393       GDFS Log[6] <- Phys[5] 131060 bytes left. Erased    19 times
    394       GDFS Log[0] <- Phys[6]  99126 bytes left. Erased    16 timesLLRS232/LLDEBUG : Unexpected signal 5197 from pid 100ab
    397       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 896 bytes requested in total ****
    398       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 960 bytes requested in total ****
    398       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 1024 bytes requested in total ****
    398       FS: Partition /ifs set to dirty
    399       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 189824 bytes requested in total ****Load Module Starter: Hunt for Program Manager failed
    


    Сообщение добавлено в 11:41 , Предыдущее сообщение было в 11:09

    Тему закрываю. Перекатал N901, тело завелось:D
     
  2.  


Статус темы:
Закрыта.

Поделиться этой страницей